Create a free account and describe your company. With the trial, CanPursue checks every opportunity against it and explains the fit.
Create free accountCreate a free account to see past contracts like this one: who won and at what price.
Create free accountTrade Agreement: CETA / WTO-AGP / CPTPP / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address: CAE Aircrew Training Services plc RAF Benson Wallingford United Kingdom OX106AA Nature of Requirements:
Helicopter Flight Simulator Training W8485-20SC11/A
Zdan, Tyler Telephone No. - (204) 509-5743 Tyler.Zdan@pwgsc-tpsgc.gc.ca
An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.
The Royal Canadian Air Force (RCAF) has a requirement for helicopter flight simulator training for RCAF CH149 crews.
The CH149 Cormorant is a sophisticated aircraft with a number of advanced systems to permit safe and effective accomplishment of Canada’s Search and Rescue (SAR) mission. It was recognized early that aircrew training for the Cormorant would be intensive and involve a variety of actual and synthetic training devices. The use of Merlin MK 3 (EH101) Full Motion Flight Simulator (FMFS) simulator training has successfully addressed many training issues and has reduced the flying hours required on the CH149 for ab-initio, conversion and continuation training. It is evident that this training must continue until such a time as the Canadian Armed Forces (CAF) can provide the equivalent training internally.
3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements):
Any interested supplier must demonstrate by way of a statement of capabilities that its product/equipment/system (as appropriate) meets the following requirements:
3.1.1 The Contractor must provide the RCAF with access to and use of a Full-Motion Flight Simulator (FMFS) which will allow for Initial, Basic, or Conversion Training (hereafter referred to as ab-initio) in an environment that approximates flying an EH101/CH149 helicopter. The FMFS must be capable of providing simulation that allows students to attain a basic level of skill and knowledge on various emergency procedures in order to be employed as, and hold, a basic flight qualification.
3.1.2 The Contractor must provide the RCAF with access to and use of an FMFS which will allow for Re-current or Continuation Training (hereafter referred to as Continuation) in an environment that approximates flying an EH101/CH149 helicopter. The FMFS must be capable of providing simulation that allows CH149 pilots and FEs already current on the CH149 to retain that currency.
3.1.3 The Contractor must provide the RCAF with access to and use of an EH101/CH149 FMFS capable of providing simulation that allows for qualification at or above FAA Level-D standards for personnel posted to the CH149 Operational Community in the capacity of but not limited to pilots and FEs for the following simulation manoeuvers:
a. 12 Hours SIM; b. Over Water Transition Down (OWTD) Flown; c. OWTD Monitored; d. OEI Procedure and Landing; e. Tail Rotor Malfunction; and f. Autorotations.
3.1.4 The Contractor must provide a minimum of 24 and a maximum of 30 continuation training simulator sessions per year of 12 hours per session (288 - 360 simulator hours per year):
3.1.5 The Contract must also provide, in addition to continuation training, a minimum of 80 simulator hours per year for ab-initio training.
3.1.6 Courses must take place at the Contractor’s location.
3.1.7 Training courses must be presented in English.
3.1.8 Training courses must be provided by presentation, lecture, simulation, audio/video presentation, group discussion and visit to support facilities, or a combination thereof.
3.1.9 All capabilities and functions of the simulator must be fully operational, serviceable, and configured to enable Canadian training objectives to be met.
3.1.10 Canadian-style PALs must be installed, Flight Control trim functions must emulate the CH149 Cormorant, and the CCU display Hover page must emulate the CCU of the CH149 Cormorant.
3.1.11 The Contractor must provide a designated classroom in close proximity to the flight simulator for the purpose of conducting pre-flight and post-flight debriefings. These briefings (up to 90 minutes in duration) will be conducted prior-to and following each training session.
3.1.12 Parking must be available in close proximity (less than 100 m) to the simulator facility entrance.
o Canadian Free Trade Agreement (CFTA) o World Trade Organization - Agreement on Government Procurement (WTO-AGP) o Canada-European Union Comprehensive Economic and Trade Agreement (CETA) o Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP)
There are currently no known alternate sources of supply or alternate service providers that meet all of the mandatory performance specifications identified in Item 3 above.
The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection: subsection 6(d) - "only one person is capable of performing the work".
o Canadian Free Trade Agreement (CFTA) - Article 513.1(a)(i),(ii) and (iii); and Article 513.1(b)(iii) o World Trade Organization - Agreement on Government Procurement (WTO-AGP) - Article XIII.1(a)(i),(ii) and (iii); and Article XIII.1(b)(iii) o Canada-European Union Comprehensive Economic and Trade Agreement (CETA) - Article 19.12.1(a)(i),(ii) and (iii); and Article 19.12.1(b)(iii) o Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) - Article 15.10.2.(a)(i),(ii) and (iii); and Article 15.10.2(b)(iii)
Ownership of any Foreground Intellectual Property arising out of the proposed contract will vest in the Contractor.
The proposed contract is for a period of three (3) years, from September 1, 2021 (estimated start date) to August 31, 2024 (estimated completion date). The proposed contract will include three (3), one-year option periods.
The estimated value of the contract, including option(s), is $11,757,702.74 (GST/HST extra).
CAE Aircrew Training Services plc. RAF Benson Wallingford, Oxfordshire OX106AA United Kingdom
Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
The closing date and time for accepting statements of capabilities is March 12, 2021 at 2:00 p.m. CST).
Name: Tyler Zdan Title: Procurement Specialist Public Works and Government Services Canada Procurement Branch Telephone: (204) 509-5743 E-mail address: Tyler.Zdan@tpsgc-pwgsc.gc.ca Delivery Date: Above-mentioned
You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.
An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.
Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.
The Crown retains the right to negotiate with suppliers on any procurement.
Documents may be submitted in either official language of Canada.
Not stated in the notice: procurement type, procurement method, selection criteria, region of delivery, region of opportunity, expected contract period, end user
The source reports 2 amendments. CanPursue observed 1 of them with dates.
No attachments listed in the open data.
No contact listed in the open data.