Create a free account and describe your company. With the trial, CanPursue checks every opportunity against it and explains the fit.
Create free accountCreate a free account to see past contracts like this one: who won and at what price.
Create free accountTrade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: SYNCHRO,RECEIVER-TRANSMITTER
W8482-145911/A
Item 1, NSN:5990009264324, SYNCHRO,RECEIVER-TRANSMITTER, BODY SIZE:23 ROTOR INPUT VOLTAGE RATING IN VOlTS:115.0 NOMINAL ROTOR INPUT CURRENT RATING:21 0.0 MilLIAMPERES MAXIMUM ROTOR INPUT ELECTRICAL POWER RATING:5.6 WAITS MAXIMUM FREQUENCY IN HERTZ:60.0 NOMINAL ZSS IMPEDANCE MAGNITUDE IN OHMS:110.00 MINIMUM AND 145.00 MAXIMUM ZSS IMPEDANCE ANGLE IN DEG:10.00 MINIMUM AND 17.00 MAXIMUM TRANSFORMATION RATIO:0.783 STATOR TO ROTOR NOMINAL PHASE SHIFT ANGLE IN DEG:11.000 INPUT TO OUTPUT NOMINAL MAXIMUM TEMP RISE:35.0 DEG CELSIUS MAXIMUM FUNDAMENTAL NUll VOLTAGE IN MilLIVOLTS PER VOlT:60.00 OUTPUT MAXIMUM TOTAL NUll VOLTAGE OUTPUT IN MilLIVOLTS PER VOlT:160.00 ELECTRICAL ERROR ANGULAR RANGE IN MINUTES:-8.0 TO 8.0 RECEIVER ERROR ANGULAR RANGE IN MINUTES:-45.0 TO 45.0 TORQUE GRADIENT PER ANGULAR DEG:0.120 INCH-QUNCES MINIMUM BODY STYlE:A4 STANDARD ROUND D SHOULDER DIAMETER:l.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM PilOT DIAMETER:0.5950 INCHES NOMINAL SECOND SHOULDER DIAMETER:1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM SECOND SHOULDER lENGTH:0.1700 INCHES NOMINAL OVERAll lENGTH:4.2990 INCHES NOMINAL FLANGE DIAMETER:2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM FLANGE THICKNESS:0.2500 INCHES NOMINAL BODY DIAMETER:1.9900 INCHES MAXIMUM PilOT lENGTH:0.0430 INCHES NOMINAL SHOULDER lENGTH:0.2500 INCHES NOMINAL AFT OF FIRST FLANGE DIAMETER:1.9400 INCHES MAXIMUM MOUNTING SURFACE TO TERMINAL END DISTANCE:3.5800 INCHES NOMINAL SHAFT TYPE:SINGlE SHAFT SPLINE WffHREADS SHAFT DIAMETER:SINGlE SHAFT 0.2403 INCHES MINIMUM AND 0.2405 INCHESMAXIMUM SHAFT lENGTH:SINGlE SHAFT 0.7190 INCHES NOMINAL SHAFT THREAD lENGTH:SINGlE SHAFT 0.2900 INCHES NOMINAL SPLINE TOOTH QUANTITY:SINGlE SHAFT 22 SPLINE TOOTH DIAMETFIAl PITCH:SINGlE SHAFT 96 SHAFT THREAD SERIES DESIGNATOR:SINGlE SHAFT UNF SHAFT NOMINAL THREAD SIZE:SINGlE SHAFT 0.250 INCHES SHAFT THREAD CLASS:SINGlE SHAFT 2A SHAFT THREAD DIRECTION:SINGlE SHAFT RIGHT-HAND TERMINAL TYPE AND QUANTITY:5 SCREW TERMINAL lOCATION:REAR BODY MATERIALSTEEl, STAINLESS TEST DATA DOCUMENT:81349-Mll-S-20708 SPEC
PNs Requiring Documentation from Vendor to Prove Suitability
P/N: 23TRX6B
NSCM: 81349 (Military Specifications, US)
Quantity:6, Unit of Issue:Each
Item 2, NSN:5990009264324, SYNCHRO,RECEIVER-TRANSMITTER, BODY SIZE:23 ROTOR INPUT VOLTAGE RATING IN VOlTS:115.0 NOMINAL ROTOR INPUT CURRENT RATING:21 0.0 MilLIAMPERES MAXIMUM ROTOR INPUT ELECTRICAL POWER RATING:5.6 WAITS MAXIMUM FREQUENCY IN HERTZ:60.0 NOMINAL ZSS IMPEDANCE MAGNITUDE IN OHMS:110.00 MINIMUM AND 145.00 MAXIMUM ZSS IMPEDANCE ANGLE IN DEG:10.00 MINIMUM AND 17.00 MAXIMUM TRANSFORMATION RATIO:0.783 STATOR TO ROTOR NOMINAL PHASE SHIFT ANGLE IN DEG:11.000 INPUT TO OUTPUT NOMINAL MAXIMUM TEMP RISE:35.0 DEG CELSIUS MAXIMUM FUNDAMENTAL NUll VOLTAGE IN MilLIVOLTS PER VOlT:60.00 OUTPUT MAXIMUM TOTAL NUll VOLTAGE OUTPUT IN MilLIVOLTS PER VOlT:160.00 ELECTRICAL ERROR ANGULAR RANGE IN MINUTES:-8.0 TO 8.0 RECEIVER ERROR ANGULAR RANGE IN MINUTES:-45.0 TO 45.0 TORQUE GRADIENT PER ANGULAR DEG:0.120 INCH-QUNCES MINIMUM BODY STYlE:A4 STANDARD ROUND D SHOULDER DIAMETER:l.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM PilOT DIAMETER:0.5950 INCHES NOMINAL SECOND SHOULDER DIAMETER:1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM SECOND SHOULDER lENGTH:0.1700 INCHES NOMINAL OVERAll lENGTH:4.2990 INCHES NOMINAL FLANGE DIAMETER:2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM FLANGE THICKNESS:0.2500 INCHES NOMINAL BODY DIAMETER:1.9900 INCHES MAXIMUM PilOT lENGTH:0.0430 INCHES NOMINAL SHOULDER lENGTH:0.2500 INCHES NOMINAL AFT OF FIRST FLANGE DIAMETER:1.9400 INCHES MAXIMUM MOUNTING SURFACE TO TERMINAL END DISTANCE:3.5800 INCHES NOMINAL SHAFT TYPE:SINGlE SHAFT SPLINE WffHREADS SHAFT DIAMETER:SINGlE SHAFT 0.2403 INCHES MINIMUM AND 0.2405 INCHESMAXIMUM SHAFT lENGTH:SINGlE SHAFT 0.7190 INCHES NOMINAL SHAFT THREAD lENGTH:SINGlE SHAFT 0.2900 INCHES NOMINAL SPLINE TOOTH QUANTITY:SINGlE SHAFT 22 SPLINE TOOTH DIAMETFIAl PITCH:SINGlE SHAFT 96 SHAFT THREAD SERIES DESIGNATOR:SINGlE SHAFT UNF SHAFT NOMINAL THREAD SIZE:SINGlE SHAFT 0.250 INCHES SHAFT THREAD CLASS:SINGlE SHAFT 2A SHAFT THREAD DIRECTION:SINGlE SHAFT RIGHT-HAND TERMINAL TYPE AND QUANTITY:5 SCREW TERMINAL lOCATION:REAR BODY MATERIALSTEEl, STAINLESS TEST DATA DOCUMENT:81349-Mll-S-20708 SPEC
PNs Requiring Documentation from Vendor to Prove Suitability
P/N: 23TRX6B
NSCM: 81349 (Military Specifications, US)
Quantity:7, Unit of Issue:Each
Alternate P/N's and NSCM's will be considered.
All items are to be shipped to CFB Esquimalt, Victoria, BC and HMC Dockyard, Halifax, NS, prior to April 11, 2014. Delivery Date: Above-mentioned
The Crown retains the right to negotiate with suppliers on any procurement.
Documents may be submitted in either official language of Canada.
Not stated in the notice: procurement type, procurement method, selection criteria, region of delivery, region of opportunity, expected contract period, end user
No amendments observed.
No attachments listed in the open data.
No contact listed in the open data.