Create a free account and describe your company. With the trial, CanPursue checks every opportunity against it and explains the fit.
Create free accountCreate a free account to see past contracts like this one: who won and at what price.
Create free accountTrade Agreement: CETA / WTO-AGP / NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address: AeroTrain Corp. 5252 Exchange Dr. Flint Michigan United States 48507 Nature of Requirements:
Aircraft Power Systems Trainer
W0113-17CS17/A Abela, Aaron Telephone No. - (905) 615-2061 ( ) e-mail: aaron.abela@pwgsc-tpsgc.gc.ca
Aircraft Power Systems Trainer
W0113-17CS17/A Abela, Aaron Telephone No. - (905) 615-2061 E-mail: aaron.abela@pwgsc-tpsgc.gc.ca
1. Advance Contract Award Notice (ACAN)
An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.
2. Definition of the requirement
Canadian Forces School of Aerospace Technology and Engineering (CFSATE) requires the supply and delivery of five (5) Aircraft Power Systems (APS) Part Task Trainers (PTT) to aid in the instruction of aircraft power systems to Avionics Systems (AVS) Technicians. CFSATE also requires the supply and delivery of eight (8) Electrical Wiring Interconnection System (EWIS) Part Task Trainers (PTTs) which will support Avionics Systems (AVS) Technician students in learning the skills necessary to perform aircraft electrical wire repairs. The EWIS trainer will provide a platform for students to perform increasingly complex repairs as the course progresses.
3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)
Any interested supplier must demonstrate by way of a statement of capabilities that its equipment meets the following requirements:
1.1 Aircraft Power Systems (APS) Part-Task Trainers (PTTs)
1.1.1.1 A multi-generator aircraft system of technology created after the year 2000, with load sharing, alternating current (AC) and direct current (DC) conditioning and multi bus distribution. 1.1.1.2 A generator control unit for AC control. 1.1.1.3 A inverter for secondary AC generation. 1.1.1.4 A Transformer-Rectifier Unit (TRU) for secondary DC generation and conditioning. 1.1.1.5 An electrical control panel, indicating system and basic electrical load.
1.1.2 Troubleshooting and repair must have the following
1.1.2.1 The PTT must insert a minimum of 16 faults of varying complexity and must include the following: a. Indication of wiring snags; b. Generator failure; c. Transformer Rectifier Unit failure; d. Battery failure; e. Bus fault/failure; f. Circuit breaker faults; g. Inverter failure; h. Relay failure (to include open coil or contacts); i. Contactor failure; and j. Power Indicators failure (amperage and voltage)
1.1.3.1 Mounted on caster wheels of the required unit weight rating for ease of movement and relocation. 1.1.3.2 Wires, cables, bus bar, relays, interrupters, switches, contactors, terminal blocks, circuit breakers, reverse-current relay, connectors and all other electrical components must reflect real aircraft components by meeting the standards of C-17-010-002/ME-001, the installation of electrical components must follow the EWIS directives as defined in C-17-010-002/ME-001. 1.1.3.3 The minimum dimensions of the Part - Task Trainer Unit must be 24 inches wide, 36 inches long,48 inches tall. 1.1.3.4 The overall dimensions of the PTT must not exceed 34 inches wide, 96 inches long and 80 inches tall to allow for relocation through doorway. The total weight of each trainer must not exceed 1,200 lbs.
1.1.4.1 An aircraft power source containing one aircraft battery of 28 VDC (Volts Direct Currents). 1.1.4.2 The battery must represent a standard aircraft battery but the weight can be reduced as long as it represents a typical aircraft battery. This battery does not need to be a real aircraft battery but must resemble a real aircraft battery in dimension and weight to carry out battery installation and removal. The dimension and weight requirement of the battery must be as follows: Length: minimum 5.2 inches to a maximum of 11 inches Width: minimum 5.5 inches to a maximum of 11 inches Height: minimum 5.2 inches to a maximum of 11 inches Weight: minimum 10lbs maximum to a maximum of 80lbs
1.1.4.3 There must be a self-charging circuit for the battery. 1.1.4.4 The battery must be installed in individual compartments. 1.1.4.5 The PTT must include an input for one of the following emergency power sources; a. Ram Air Turbine (RAT); or b. Auxiliary Power Unit (APU).
1.1.5.1 The PTT must represent an Electrical Power Generation Systems including at least two generators. This technology must be created after year 2000. 1.1.5.2 Test points for the voltage output and winding resistance must be provided. The generator does not need to rotate and the generator drive is not required.
1.1.6.1 The Part-Task Trainer Unit must produce or convert power into all of the following forms: a. 115VAC, 3 phase, 400hz; b. 28 VDC; and c. 24 VDC battery.
1.1.6.2 TRUs and static converters must be used for the aircraft electrical power conversion systems. 1.1.6.3 At least one transformer unit and one inverter unit must be installed on the PTT to provide hands on maintenance and troubleshooting. The units must simulate realistic removal and installation procedures and test points for troubleshooting. The voltage must reflect the proper reading but the current can be reduced to a safe level
1.1.7 Aircraft Power Protection, Control and Regulation Systems - Generator Control Unit (GCU) must have:
1.1.7.1 The control panel must be located on the PTT platform. The control panel must have easy access control switches for troubleshooting. 1.1.7.2 The PTT must have an indicating system that displays: a. Generator Voltage; b. Generator Amperage; c. Generator Status; d. Inverter Status; e. Bus Configuration; and f. Battery Amperage.
1.1.7.3 The PPT must use circuit breakers for circuit protection.
1.1.7.4 The PTT must provide the following controls: a. Selector switches for all loads an outlined in M8; b. GCU; and c. Master power switch.
1.1.7.5 The GCU must provide: a. Current limiting control; b. Over voltage protection; c. Voltage regulation; and d. Reverse current protection.
1.1.8.1 The distribution system must represent a multi-engine aircraft during normal power distribution, as well as power failure of one and two generators. 1.1.8.2 Power Distribution system must contain a minimum of: a. Two 115 VAC, 400Hz busses; b. Two 28 VDC busses; c. One Battery Bus; and d. One Ground Bus.
1.1.8.3 The Power distribution system must include two or more of each of the following electrical loads; a. Electrical mechanical; b. External lighting; and c. Internal lighting.
1.1.9.1 Clear coverings over exposed bus bars and terminals. 1.1.9.2 Protective covers over hazardous areas. 1.1.9.3 Safety warnings clearly marked and visible. 1.1.9.4 Emergency shut off.
4. Applicability of the trade agreement(s) to the procurement
This procurement is subject to the following trade agreement(s): a. Canadian Free Trade Agreement (CFTA) b. North American Free Trade Agreement (NAFTA)
5. Justification for the Pre-Identified Supplier
AeroTrain Corporation is the only known company who can supply and deliver five (5) Aircraft Power Systems (APS) Part Task Trainers (PTT) to aid in the instruction of aircraft power systems to Avionics Systems (AVS) Technicians. AeroTrain Corporation specializes in developing customized training products and training solutions for aviation training solutions for aviation training institutions and can produce custom made trainers tailored to meet unique requirements. AeroTrain Corporation is the only known supplier for this advanced and custom type of equipment.
6. Government Contracts Regulations Exception(s)
The following exception(s) to the Government Contracts Regulations is (are) invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work").
7. Exclusions and/or Limited Tendering Reasons
The Canadian Free Trade Agreement (CFTA) is applicable to this requirement. Limited Tendering is applicable under Article 513 (b) where, ?the goods or services can be supplied by a particular supplier an no reasonable alternative or substitute goods or services exist for any of the following reasons (i, ii, iii, iv, v, vi).
The North American Free Trade Agreement (NAFTA) Limited Tendering is applicable under Article 1016, 2 (b) where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or service can be suppled only by a particular supplier and no reasonable alternative or substitute exists.
The North American Free Trade Agreement (NAFTA) Limited Tendering is applicable under Article 1016, 2 (d) where a change in supplier would compel the entity to procure equipment or services not meeting requirements of inter changeability with already existing equipment or services.
World Trade Organization Agreement on Government Procurement (WTO-AGP) Article XV (b) when, for works of art or for reasons connected with protection of exclusive rights, such as patents or copyrights, or in the absence of competition for technical reasons, the products or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists.; (d) for additional deliveries by the original supplier which are intended either as parts replacement for existing supplies, or installation, or as the extension of existing supplies, services, or installations where a change of a supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services.
8. Period of the proposed contract or delivery date
The equipment and all other associated deliverables must be completed on or before March 31, 2018. Delivery to Canadian Forces School of Aerospace Technology and Engineering (CFSATE) 83 Argus Crescent (Building A-171) Borden, Ontario, Canada. L0M 1C0.
9. Cost estimate of the proposed contract
The estimated value of the contract, including options(s) is $321,000.00 (applicable taxes included).
10. Name and address of the pre-identified supplier
AeroTrain Corp. 5252 Exchange Drive Flint, MI 48507 USA
11. Suppliers' right to submit a statement of capabilities
Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
12. Closing date for a submission of a statement of capabilities
The closing date and time for accepting statements of capabilities is November 23, 2017 at 2:00 p.m. EST.
Aaron Abela Supply Specialist 33 City Centre Drive, Suite 480-C Mississauga, ON L5N 3C2 Telephone: 905-615-2061 E-mail: aaron.abela@pwgsc-tpsgc.gc.ca
You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.
An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.
Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.
The Crown retains the right to negotiate with suppliers on any procurement.
Documents may be submitted in either official language of Canada.
Access and terms of use Government of Canada (GC) tender notices and awards, solicitation documents and tender attachments are available free of charge and without registration on Buyandsell.gc.ca/tenders, the authoritative location for GC tenders.
You may have received this tender notice or award through a third-party distributor. The Government of Canada is not responsible for any tender notices and/or related documents and attachments not accessed directly through Buyandsell.gc.ca/tenders.
This Government of Canada tender notice or tender award carries an Open Government Licence - Canada that governs its use. Related solicitation documents and/or tender attachments are copyright protected. Please refer to the section about Commercial Reproduction in the Buyandsell.gc.ca Terms and Conditions for more information.
Delivery Date: Above-mentioned
You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.
An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award. However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.
Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.
The Crown retains the right to negotiate with suppliers on any procurement.
Documents may be submitted in either official language of Canada.
Not stated in the notice: procurement type, procurement method, selection criteria, region of delivery, region of opportunity, expected contract period, end user
No amendments observed.
No attachments listed in the open data.
No contact listed in the open data.