SUPPLY FENDER CAMEL

Trade Agreement: Agreement on Internal Trade (AIT) Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Best Overall Proposal Comprehensive Land Claim Agreement: No Nature of Requirements: SUPPLY FENDER CAMEL

Fender camels are utilised by the Canadian Forces Auxiliary Fleet to support fuelling operations of water compensated ships. The camels provide a stable platform which facilitates the hOok up of collection hoses which are attached near the water line to receive compensatory water from fuel tanks during fuelling operations. This effluent contains petroleum products and must be captured and processed to prevent contamination of harbour waters Two fender camels are required to allow space between the ship being fuelled and the collection barge. The camels must be stable and sufficiently robust to provide personnel a working platform and maintain distance between the vessel and barge. The camel must be 15 ft long by 6 ft wide to produce sufficient fendering length and to allow hoses to be deployed and recovered from the ship discharge hull fitting. The camels must have a freeboard of l' 6"- l' 8' to properly align with the discharge hull fitting. The construction material must be made from environmentally stable material reinforced to provide structural strength to withstand the pressure between the ship and barge. Displacement tonnage for various vessels, Arleigh Burke Class 9,238, Algonquin 5,300, YOM Class 1,000. The camel must be able to withstand the resultant pressures in conjunction with tidal and wind pressures normally associated with Esquimalt Harbour. Other features include - lifting points of sufficient strength to lift the camel - Four securing cleats for tying up - Platform top to enable personnel to handle hoses and ship side connections - Constructed of an engineered product with the following features, non corroding, non rotting, petroleum degradation resistant, UV resistant without coatings, resist marine growth accumulation and easily cleaned. - Camels must be maintenance free for a minimum of ten years - Non marking 0 rubber fendering on four sides The camels must have extreme crush resistance and made from a material that the buoyancy can be modified to provide a stable work platform The contractor must have a proven line of products which meet the requirements with minimal modification.

Sourcing Strategy The sourcing strategy related to this procurement is subject to the Agreement on Internal Trade (AIT). This procurement is exempt from NAFTA [see Chapter 10, Annex 1001.1b-2, paragraph 1 (a) and from the WTO-AGP (see Annex 4, Note to annex 4)

Delivery Date: Above-mentioned

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.