NAFC Water System HDPE Piping & Equipment

Trade Agreement: WTO-AGP/NAFTA/AIT/Canada-Peru FTA/Canada-Colombia FTA Tendering Procedures: All interested suppliers may submit a bid Attachment: None Competitive Procurement Strategy: Lowest/Lower Bid Comprehensive Land Claim Agreement: No Nature of Requirements: NAFC Water System HDPE Piping & Equipment

E0224-132499/A Chaulk (OLZ) Patricia Telephone No. - (709) 772-8357 Fax No. - (709) 772-4603

The Department of Fisheries and Oceans (DFO), Northwest Atlantic Fisheries Centre (NAFC) St. John's, NL has a requirement for HDPE Piping, Valves and associated equipment as follows:

1. Eight (8) each Eight inch (200 mm) Polyethylene Ball valves, Full Port, PE Wall - SDR11, Normal OD - 8.625 inches, Materials: PE3408/PE100 Black SDR 11 rated @ 160 PSI for water. Temperature: From -20 F to 140 F (-20 C to 60 C. Pipe Connection - Butt Fusion and supplied with Butt Fused Joint Insulation Kit (50 mm thick UIP Urethane Insulation). Valves to meet ASTM D 2513 Requirements.

2. Sixteen (16) each Eight inch (200 mm) DR11 Electrofusion Couplings, (200 mm) 8"iron pipe size (IPS) Electrofusion coupling, SDR11 240 PSI, made from PE100, ASTM D-3261, ASTM D-3350, AWWA C-906, DIN16963, EN1555, EN12201, meets FM Class 200.

3. One (1) each Electrofusion machine Operating Type: Controlled voltage. Operating Modes: Manual, Fusamatic #1, Bar Code Operating Languages: minimum English and French (others on request) Operating Temperature: 14oF to 104oF #2 Welding Voltage: 8 to 48 V ac (39,5 V) Welding Current: 1 to 65 A ac (true rms) (100 A short term) Welding Power: 8 VA to 3120 VA Welding Time: 1 to 3600 seconds Apparent Power Factor: 0.15 to 0.92 Supply Voltage: #3 110 V ac (+/- 20%) 40 to 60 Hz Supply Current: #3 1 to 30 A ac (true rms) Supply Power: #3 3,500 W (peak at 0.15 APF) Supply Voltage: #4 230 V ac (+/- 20%) 40 to 60 Hz Supply Current: #4 1 to 15 A ac (true rms) Supply Power: #4 3,500 W (peak at 0.15 APF) Supply Protection: Class 1 - Earthed Data log memory: 2048 welds Data download/upload: USB flash memory drive IP65 Extended temperature unit is with limits -40oF to +122oF. The unit is 230v operation.

4. Sixty five (65) each, 15.24 m (50 ft.) long of pre insulated SDR 11 HDPE pipe. Pipe to be 8" (200 mm) DR11, rated for 200 psi with 50 mm (2") thick UIP urethane insulation, 50 Mil taped outer jacket suitable for direct bury application and one (1) butt fused joint insulation kit per 50 ft. Length. Insulation to be; rigid polyurethane foam, factory applied, 50 mm thick, Density ASTM D 1622, 35 to 46 kg/m3, Closed cell content, ASTM D 6226, 90% minimum and Water absorption ASTM D 2842, 4% by volume Tape Wrap System; polyethylene, UV inhibited, formulated for cold environment, Sealant, butyl rubber and resin applied in hot 25 Mil multiple layers to provide a shrink tightened waterproof bond. All pipe lengths shall come with removable end caps to prevent anything from entering/contaminating the pipe as it will be stored outside subject to weather, UV rays and environmental conditions

5. One (1) each Pipe scraper similar or equal to a Ritmo RTC315

Delivery Destination

Northwest Atlantic Fisheries Centre (NAFC) 70-80 East White Hills Road St. John's, NL

This requirement is subject to the provisions of the Agreement on Internal Trade (AIT); and the North American Free Trade Agreement (NAFTA).

The PWGSC office provides procurement services to the public in English but documents may be submitted in either official language of Canada.

Delivery Date: Above-mentioned

The Crown retains the right to negotiate with suppliers on any procurement.

Documents may be submitted in either official language of Canada.