Laboratory equipment - Analytical High Precision Microbalances

M1 The analytical high precision microbalances must have a Maximum Capacity (Max) of at least 6.1 g. M2 The analytical high precision microbalances must have a Minimum Weight (USP, 0.1%) not greater than 0.6 mg. M3 The analytical high precision microbalances must be capable of repeatability of not greater than 0.0003 mg with 5% load. M4 The analytical high precision microbalances must have a Readability 0.0005 mg or better. M5 The analytical high precision microbalances must have a temperature control system to aid with controlling fluctuations in temperature around the weighing area. M6 The analytical high precision microbalances must have the ability to store methods and data. M7 The analytical high precision microbalances must have touchscreen operation that is glove compatible. M8 The analytical high precision microbalances must have built in quality assurance monitoring and audit trail functions. M9 The analytical high precision microbalances must have built in level controls, leveling guides, and internal adjustment capability. M10 The analytical high precision microbalances must be provided with a draft shield and overload protection. M11 The analytical high precision microbalances must have USB(A/B), RS232, and ethernet (LAN) interfaces to allow for connection to computer, device, or offloading data to a flash drive. M12 The analytical high precision microbalances must have touch free door operation to reduce risk of contamination. M13 The analytical high precision microbalances must have 21 CFR Part 11 Complaint weighing capability and is Lab X compatible.