Building Cleaning Services at the Aluminum Technology Center Saguenay Site (SAG01)

.1 Provide complete building cleaning services in the most efficient and environmentally friendly manner to maintain cleanliness and hygiene at the various buildings and sites. .2 Clean and maintain all areas within each building except those areas specifically excluded in accordance with the building design, interior building decorations and furnishings, established building operations and schedules, procedures for safety as prescribed by all applicable codes, regulations and NRC/RPPM standards. .3 Inspect all areas for the cleaning requirements, respond to all service calls and complaints, investigate the unsatisfactory conditions and take appropriate corrective action. .4 Supply all materials, supplies and products required to carry out the building cleaning services. Sufficient stock of materials and supplies must be maintained to satisfy the cleaning requirements. .5 Supply all equipment, power and hand tools, machines, carts, ladders and scaffolding as necessary to perform the services if required. .6 Employ such methods as necessary to avoid defacement or damage to the buildings and ensure all materials and methods used are compatible with the surfaces on which they are used. .7 Provide waste and recyclable collection services in each building and transport this waste to a central collection location. (Goods reception and waste room). .8 Work excluded from the Scope of Work · Collection of hazardous and chemical waste; · Disposal of waste and recycled materials; · Removal of snow from sidewalks, traffic areas and parking lots; · Maintenance of exterior furnishings; · Cleaning of high-level exterior perimeter windows (over 3 m); · Cleaning of outer and inner atrium windows of the central hall.