Create a free account and describe your company. With the trial, CanPursue checks every opportunity against it and explains the fit.
Create free accountCreate a free account to see past contracts like this one: who won and at what price.
Create free accountAn advanced contract award notice (ACAN) is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meet the requirements set out in the ACAN, on or before the closing date and time stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.
The Correctional Service Canada (CSC) / CORCAN has a requirement for Construction services to complete the Structural component for Project # R.043477.001 for File Storage Renovation. CORCAN Construction is the General Contractor and Prime Constructor for Project # R.043477.001 - Building B4 RECORDS ROOM EXPANSION, UNIT 6 RECORDS ROOM EXPANSION SASKATCHEWAN PENITENTARY, RIVERBEND INSTITUTE.
CORCAN Construction requires contractor to complete the structural component for Project No. R.043477.001 for File Storage Renovations.
? The Contractor must complete the provision of the Structural Component as per Division 05 of the specifications for Project No.R.043477.001 for the Unit 6 File Storage Renovations and F25 File Storage Renovations – (reference document Project NO. R.043477.001).
? The Contractor must complete the Structural Component for Project No. R.043477.001 for the Unit 6 Record Room Renovations as outlined in drawings S4.1 and S4.2. with the following additional modifications. Change conventional rebar to upgraded 2.54 (1”) diameter hard rolled steel of CSA G40.12 grade. Add additional diagonal bracing as required at 2.44 m (8’) o.c. between all reinforced OWSJ under the rolling file system, bracing material to be Standard 11/2 x 11/2 x ¼” angle iron.
? The Contractor working on the site must acknowledge and accept CORCAN Construction as the Prime constructor and abide by CORCAN Construction’s Policy Manual which outlines the requirements for Health, Safety and Security as well as the responsibilities of management, supervisory, workers, subcontractors and the Health and Safety Representative.
? The Contractor must also abide by CORCAN Construction’s House Keeping Policy and Waste Reduction Work plan (WRW).
1.3 Expected results: The expected result is to have the Structural component completed for Project No. R.043477.001 for Unit 6 Records Room Expansion at the Saskatchewan Penitentiary.
The Contractor must meet the specifications as set out in the Structural Component for Project No. R.043477.001 for the Unit 6 Record Room Renovations as outlined in drawings S4.1 and S4.2. with the following additional modifications. Change conventional rebar to upgraded 2.54 (1”) diameter hard rolled steel of CSA G40.12 grade. Add additional diagonal bracing as required at 2.44 m (8’) o.c. between all reinforced OWSJ under the rolling file system, bracing material to be Standard 11/2 x 11/2 x ¼” angle iron.
The Contractor must also abide by CORCAN Construction’s House Keeping Policy and Waste Reduction Work plan (WRW).
1.5 Deliverables: n/a
1.5.1 n/a
a. Should printed material be required, double sided printing in black and white format is the default unless otherwise specified by the Project Authority.
b. The Contractor must ensure printed material is on paper with a minimum recycled content of 30% and/or certified as originating from a sustainably managed forest.
c. The Contractor must recycle unneeded printed documents (in accordance with Security Requirements).
a. The Contractor must perform the work at the Saskatchewan Penitentiary in Prince Albert Saskatchewan.
b. Travel
No travel is anticipated for performance of the work under this contract.
The contractor must perform all work in English.
There are no security requirements associated to this contract.
Any interested supplier must demonstrate by way of a statement of capabilities that it meets the following requirements:
• The contractor must have the capacity to supply, fabricate and install the structural steel required for the Records Room Expansion Project at the Saskatchewan Penitentiary.
• The contractor must have experience working within a correctional environment.
• Professional certification: Welder – CWB Certified Division 2
3. Applicability of the trade agreement (s) to the procurement This procurement is subject to the following trade agreement (s): North American Free Trade Agreement (NAFTA)] The procedural requirements of the other international trade agreements will be fulfilled following compliance to the procedural requirements of NAFTA and/or the WTO-AGP.
4. Set-aside under the Procurement Strategy for Aboriginal Business This procurement is not subject to any set-asides for Aboriginal Suppliers.
5. Comprehensive Land Claims Agreement (s) This procurement is not subject to a Comprehensive Land Claims Agreement.
6. Justification for the Pre-Identified Supplier
The pre-identified supplier has currently completed two thirds of work under this project, has a working knowledge of the project, has liaised extensively with the engineer, and has the materials required to complete the structural component of this project. To ensure compatibility with existing products and to maintain consistency within the project the previous supplier has been named to complete the work.
The pre-identified supplier meets the minimum essential requirements described in this ACAN.
7. Government Contracts Regulations Exception(s)
The following exception to the Government Contracts Regulations is invoked for this procurement under subsection: (d) only one person is capable of performing the contract.
8. Exclusions and/or Limited Tendering Reasons
The following exclusion (s) and/or limited tendering reasons are invoked under the section of the trade agreement (s) specified:
North American Free Trade Agreement (NAFTA) - Article 1016: Limited Tendering Procedures, section 2.
(d) for additional deliveries by the original supplier that are intended either as replacement parts or continuing services for existing supplies, services or installations, or as the extension of existing supplies, services or installations, where a change of supplier would compel the entity to procure equipment or services not meeting requirements of interchangeability with already existing equipment or services, including software to the extent that the initial procurement of the software was covered by this Chapter;
9. Ownership of Intellectual Property
Ownership of any foreground intellectual property arising out of the proposed contract will vest with the Contractor.
10. The period of the proposed contract or the delivery date(s)
The proposed contract is for a period of 8 months, from August 3rd 2015 to March 31st, 2016.
11. A cost estimate of the proposed contract
The estimated value of the contract is $94,000.00 (GST/HST extra).
12. Name and address of the pre-identified supplier
Dee Jacks Custom Welding Inc. RR5 Site 14 Comp 101 Prince Albert, SK S6V 5R3
13. Suppliers' right to submit a statement of capabilities
Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN, may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date and time of this notice. This statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
14. The closing date and time for a submission of a statement of capabilities
The closing date and time for accepting statements of capabilities is July 20, 2015 at 12:00 PM CST.
15. Enquiries and submission of statement of capabilities
Claudette Chabot Correctional Service Canada Contracting and Materiel Services 3427 Faithfull Avenue Saskatoon SK, S7K 8H6 Phone: 306-659-9255 Fax: 306-659-9317 Email: 501Contracts@csc-scc.gc.ca
Not stated in the notice: procurement type, procurement method, selection criteria, region of delivery, region of opportunity, expected contract period, end user
No attachments listed in the open data.
No contact listed in the open data.